Home Company Products Customer Service Engineering Drawings News Faq Pdf Order Site Map Contact Us

Gabion Cladding
This application of gabions is relatively new, the purpose is to achieve a textured finish to buildings and other structures.
Normally a thin vertical face of gabions 0.3 to 0.5m thick is secured to the main body of the building with clamp bars. Sizing of the cells of the units is important for constructional and aesthetic reasons and should not exceed a face area of 0.7 x 0.7m, otherwise deformation of the face can occur. The minimum wire diameter for the gabion should be 4mm for cladding up to 4 to 5m. Above this height a 5mm diameter should be used for the lower 4 to 5 m with a 4mm wire above.

Where a gabion facing is required with a sloping face, Yuanxi gabion can be used with the face inclined and the rear face vertical. It may be possible to design this type of cladding as an effectively free standing wall not physically tied back to the main structure.
Gabion Faced Reinforced Soil Walls Gabion Revetments River Walling
Free Standing Walls Gabion Cladding Rockfall Protection
Gabion Outfall And Structures Weir Structures Mass Gravity Retaining Walls
English German Spanish French Italian Portuguese Japanese Korean Arabic Russian
Copyright © 2009 Gabion - Anping Yuanxi Metal Products Co.,Ltd
Tel: 0086-318-7711307  7712680 Fax: 0086-318-7712895       Zip: 053600
Main Gabion Products:Gabion, Gabions,Gabion box